Datasheet



Alcatel-Lucent OmniSwitch 6855 Data Sheet
8

OmniSwitch 6855 Ordering
PART NUMBER DESCRIPTION
OmniSwitch 6855 Models
OS6855-14
OS6855-14D
L3 fixed configuration fan-less switch in a 1U form factor. It has 12 RJ-45 connectors
individually configurable to 10/100/1000BaseT, four of which are PoE capable and two
SFP ports which support various distances. The bundle comes with OS6855-PSS or
OS6855-PSS-D power supply respectively
OS6855-U10
OS6855-U10D
L3 fixed configuration fan-less switch in a 1U form factor. It has two RJ-45 connectors
individually configurable to 10/100/1000BaseT, and eight SFP ports which support
various distances. The bundle comes with OS6855-PSS or OS6855-PSS-D power supply
respectively
OS6855-24
OS6855-24DL
OS6855-24D
L3 fixed configuration switch in a 1U form factor. It has 20 RJ-45 connectors
individually configurable to 10/100/1000BaseT, four of which provide PoE and four
combo ports. On the combo ports, either copper or fiber can be used on a one-for-one
basis. The bundle comes with OS6855-PSL-P, OS6855-PSL-D or OS6855-PSL-DL power
supply respectively.
OS6855-U24
OS6855-U24DL
OS6855-U24D
L3 fixed configuration switch in a 1U form factor. It has 22 SFP ports which support
various distances, and two combo ports. On the combo ports, either RJ-45 connectors
individually configurable to 10/100/1000BaseT, or fiber SFP can be used on a one-for-
one basis. The bundle comes with OS6855-PSL OS6855-PSL-DL or OS6855-PSL-D power
supply respectively
OS6855-U24X
OS6855-U24XDL
OS6855-U24XD
L3 fixed configuration switch in a 1U form factor. It has two 10 Gig SFP+ ports, 22 SFP
ports which support various distances, and two combo ports. On the combo ports,
either RJ-45 connectors individually configurable to 10/100/1000BaseT, or fiber SFP
can be used on a one-for-one basis. The 10Gig SFP+ ports can be used either as uplinks
or as stacking ports. The bundle comes with OS6855-PSL OS6855-PSL-DL or OS6855-
PSL-D power supply respectively
TRANSCEIVERS All optical transceivers qualified for OmniSwitch 6855 operate at wider operating
temperature range than the corresponding commercial types.
iSFP-10G-SR 10 Gigabit industrial optical transceiver (SFP+). Supports multimode fiber over 850nm
wavelength (nominal) with an LC connector. Typical reach of 300m.
iSFP-10G-LR 10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over
1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km
iSFP-GIG-LH70 1000BaseLH industrial transceiver. Supports single mode fiber over 1550nm
wavelength (nominal) with an LC connector. Typical reach of 70km.
iSFP-GIG-LH40 1000BaseLH industrial transceiver Supports single mode fiber over 1310 nm
wavelength (nominal) with an LC connector. Typical reach of 40 Km.
iSFP-GIG-LX 1000BaseLX industrial transceiver Supports single mode fiber over 1310 nm wavelength
(nominal) with an LC connector. Typical reach of 10 Km.
iSFP-GIG-SX 1000BaseSX industrial transceiver. Supports multimode fiber over 850 nm wavelength
(nominal) with an LC connector. Typical reach of 300m.
iSFP-GIG-T 1000Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5,
5E, and 6 copper cabling up to 100m. SFP supports 10/100/1000 Mbit/s and full-
duplex mode
iSFP-GIG-BX-U 1000Base-BX SFP transceiver with an LC type of interface. Supports single mode fiber
optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm
optical signal.
iSFP-GIG-BX-D 1000Base-BX SFP transceiver with an LC type of interface. Supports single mode fiber
optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm
optical signal.
iSFP-100-MM 100BaseFX Industrial transceiver with an LC type interface. This transceiver is
designed for use over multimode fiber optic cable.
iSFP-100-SM15 100BaseFX Industrial transceiver with an LC type interface. This transceiver is
designed for use over single mode fiber optic cable up to 15KM.
iSFP-100-SM40 100BaseFX Industrial transceiver with an LC type interface. This transceiver is
designed for use over single mode fiber optic cable up to 40KM.
iSFP-100-BX-U 100BaseBX Industrial transceiver with an SC type interface. This bi-directional
transceiver is designed for use over single mode fiber optic on a single strand link up
to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits