Datasheet

Alcatel-Lucent OmniSwitch 6850 | Data Sheet 3
Technical specifications
Physical dimensions
Chassis size without power supply and shelf:
¬ Width: 44.0 cm (17.32 in)
¬ Depth: 27.0 cm (10.63 in)
¬ Height: 4.4 cm (1.73 in)
Total size including power supply and shelf:
¬ Width: 48.2 cm (19.00 in)
¬ Depth: 44.6 cm (17.56 in)
¬ Height: 4.4 cm (1.73 in)
Acoustic levels of switch and power supply
Under 44 dB for all models, measured with a
single power supply at room temperature
Environmental requirements of switch
and power supply
Operating temperature: 0°C to +45°C
(32°F to 11F)
Storage temperature: -10°C to +70°C
(1F to 158°F)
Humidity (operating and storage): 5% to 95%
non-condensing
Cyclic temperature and humidity tests of -5°C to
+55°C, 5% to 90% Relative Humidity (RH) for
the duration of ~185 hours as per GR-63-CORE
Table 3. OmniSwitch 6850 power consumption, heat dissipation and weights
PRODUCT MTBF (HOURS) POWER CONSUMPTION (WATTS)* HEAT DISSIPATION (BTU/HOUR)** WEIGHTS (CHASSIS ONLY)
PoE MODELS
OS6850-P24 153,497 82 279 8.62 lb (3.91 kg)
OS6850-P24X 148,929 85 289 8.86 lb (4.02 kg)
OS6850-P48 128,390 152 517 9.39 lb (4.26 kg)
OS6850-P48X 119,750 171 584 9.59 lb (4.35 kg)
NON-PoE MODELS
OS6850-24 200,421 55 188 8.36 lb (3.79 kg )
OS6850-24X 191,695 58 198 8.86 lb (4.02 kg )
OS6850-48 162,844 97 331 9.39 lb (4.26 kg )
OS6850-48X 149,608 117 399 9.59 lb (4.35 kg )
OS6850-U24X 207,199 119 406 8.00 lb (3.63 kg)
* Calculated maximum power consumption. The power consumed by the power device attached to the PoE port is not included.
** Under full trafc load
Interface and speeds
24 and 48 ports 10/100/1000, 24 ports
100/1000 Base-X
Wire rate at layer-2 and layer-3 on
all ports
Two built-in 10 Gb/s full-duplex
stacking ports
Switching throughput:
¬ 24 port: 35.7 million packets per
second (Mp/s)
¬ 24 port with two 10 GigE ports:
65.5 Mp/s
¬ 48 port: 71.4 Mp/s
¬ 48 port with two 10 GigE ports:
101.2 Mp/s
Stacking capacity:
¬ 40 Gb/s per unit, up to 320 Gb/s
per stack
Indicators
Per-port LEDs
10/100/1000: PoE, link/activity
SFP: link/activity
XFP: link/activity
System LEDs
Switch ID (indicates the stack ID of the
unit in the stack: 1 to 7)
System (OK) (chassis HW/SW status)
PWR (primary power supply status)
PRI (virtual chassis primary)
BPS (backup power status)
Compliance and certifications
Commercial
EMI/EMC
FCC CRF Title 47 Subpart B (Class A)*
VCCI (Class A)*
AS/NZS 3548 (Class A)*
CE marking for European countries (Class A)*
EN 55022:2006 (Emission Standard)
EN 61000-3-3:1995+A2:2005
EN 61000-3-2:2006
EN 55024:1998+A1:2001+A2:2003 (Immunity
Standards)
¬ EN 61000-4-2: 1995+A1:1998+A2:2001
¬ EN 61000-4-3:2006
¬ EN 61000-4-4:2004
¬ EN 61000-4-5:2006
¬ EN 61000-4-6:2007
¬ EN 61000-4-8:1993+A1:2001
¬ EN 61000-4-11:2004
IEEE802.3: Hi-Pot Test (2250 V DC on all
Ethernet ports)
NEBS**
GR-63-CORE (temperature, humidity, altitude,
contamination)
GR-1089-CORE Issue 4 (section 2-3)
GR-1089-CORE Issue 4 (section 3.2, 4-10)
Safety agency certifications
US UL 60950
IEC 60950-1:2001; all national deviations
EN 60950-1:2001; all deviations
CAN/CSA-C22.2 No. 60950-1-03
NOM-019 SCFI, Mexico
AS/NZ TS-001 and 60950:2000, Australia
UL-AR, Argentina
UL-GS Mark, Germany
EN 60825-1 Laser
EN 60825-2 Laser
CDRH Laser
* Note: Class A with UTP cables
** NEBS certifications received for all non-PoE models
Detailed product features
Simplified manageability
Management interfaces
Intuitive, familiar Alcatel-Lucent CLI reduces
training costs
Easy-to-use, point-and-click, web-based element
manager (WebView) with built-in help for easy
configuration
Integration with Alcatel-Lucent OmniVista
products for network management
Full configuration and reporting using
SNMPv1/2/3 across all OmniSwitch families
to facilitate third-party network management
system integration
Remote switch access using Telnet or Secure
Shell (SSH)
File upload using USB, TFTP, FTP, SFTP, or SCP
for faster configuration
Human-readable ASCII-based configuration
files for off-line editing, bulk configuration
and out-of-the-box auto-provisioning