Datasheet
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo
are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility
for inaccuracies contained herein. Copyright © 2011 Alcatel-Lucent. All rights reserved.
EMG3105110312 (04)
Ordering information
Table 3. OmniSwitch 6900 ordering information
MODULES
OS6900-X20-F 10Gigabit Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes
a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately.
OS6900-X20D-F 10Gigabit Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 20 SFP+ ports, one optional module slot. The chassis includes
a 450W DC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately.
OS6900-X40-F 10Gigabit Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes
a 450W AC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately.
OS6900-X40D-F 10Gigabit Ethernet L2/L3 fixed configuration chassis in a 1U form factor with 40 SFP+ ports, two optional module slots. The chassis includes
a 450W DC power supply. A second power supply slot is supported for redundancy. Redundant power supply shall be ordered separately.
OS-XNI-U12 10Gigabit Ethernet Optional Module for the OS6900 series of switches. Supports 12 SFP+ ports.
OS-XNI-U4 10Gigabit Ethernet Optional Module for the OS6900 series of switches. Supports 4 SFP+ ports.
OS-HNI-U12* Optional Module for the OS6900 series of switches. Supports 2 QSFP+ ports and 4 SFP+ ports.
OS-QNI-U3* 40Gigabit Ethernet Optional Module for the OS6900 series of switches. Supports 3 QSFP+ ports.
BACKUP POWER SUPPLIES
OS6900-BP-F Modular AC backup power supply. Front to back cooling. Provides backup system power to one 6900 switch
OS6900-BPD-F Modular DC backup power supply. Front to back cooling. Provides backup system power to one 6900 switch
OS6900-FT-F OS6900 replacement fan tray; front to back cooling.
SOFTWARE
OS6900-SW-AR Advanced routing software license. Includes BGP, OSPF, PIM-SM, DVMRP, IPv6 stack, MC-LAG
GBE TRANSCEIVERS
SFP-GIG-T 1000Base-T Gigabit Ethernet Transceiver (SFP MSA). SFP works at 1000 Mbit/s speed and full-duplex mode.
SFP-GIG-SX 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA)
SFP-GIG-LX 1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA)
SFP-GIG-LH40 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA).. Typical reach of 40 Km on 9/125 μm SMF.
SFP-GIG-LH70 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA).. Typical reach of 70 Km on 9/125 μm SMF.
10GBE TRANSCEIVERS
SFP-10G-SR 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m
SFP-10G-LR 10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10Km
SFP-10G-ER 10 Gigabit optical transceiver (SFP+). Supports monomode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km
SFP-10G-LRM 10 Gigabit optical transceiver (SFP+). Supports multimode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of
220m on FDDI-grade (62.5μm)
SFP+ DIRECT ATTACHED CABLES
SFP-10G-C1M 10 Gigabit direct attached copper cable (1m, SFP+)
SFP-10G-C3M 10 Gigabit direct attached copper cable (3m, SFP+)
SFP-10G-C7M 10 Gigabit direct attached copper cable (7m, SFP+)
Service and Support
Warranty
Limited lifetime hardware warranty: Limited to the original owner, and will be provided for up to 5 years after the product’s
End-of-Sales announcement.
* roadmap item