User Manual Table of Contents Safety and Use ...................................................................................................................... 2 Installation Guide ................................................................................................................. 4 Main Interface Overview ................................................................................................... 4 Entrance to Main Interface .........................................................
Safety and Use We recommend that you read this chapter carefully before using your modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the modem or of use contrary to the instructions contained herein. Traffic Safety When driving, do not use the modem: When switched on, the modem emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags.
10. Do not paint the modem. Collection Point: This symbol on the modem means that it must be taken to collection points at the end of their life: Municipal waste disposal centers with specific bins for these items of equipment Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries: These collection points are accessible free of charge.
Installation Guide Installation procedures may vary based on the operating system installed on your PC. The following instructions are based on the Windows XP OS: Turn on your PC and plug the modem into the USB interface slot to begin software installation. Windows should automatically detect the new device and will prompt you to begin installation. After following the prompts of installation setup, upon completion, a shortcut will be placed on your desktop for quick future access. Note: 1.
Connection Statistics Icon Description Network Signal Indicates the signal strength of the network Network Status Indicates the network status. This will display the operator name which the modem can find the network. Or show the modem haven’t ready.
A PUK dialog box will then be displayed asking you to enter the right PUK code, PIN Code and Confirmed PIN. Click on if you fail to input the correct PUK code after 10 attempts, you will need to contact your service provider. If the PUK and PIN code is correct, the application will be launched and all features are enabled Connect to Internet 1.
• Account (Connection Naming), Number, APN, User Name, password and final choice which Auth Type you are using by manually; Click Please select you preferred network and click on to default your connection setting. • • Note：Users may obtain Number, APN Code, User Name, Password and Auth type information from networks provider. SMS Services (Text Message) Click SMS icon from the main interface of the PC suite to access the SMS service. 1.
to the recipient list. (2) Click on to send the message. If the message is not sent, it will be saved in the Outbox. 4. Reply y Select a message in the inbox and then click on in the shortcut menu bar; y The recipient’s / number will appear. It can now be modified; y Enter the reply in input field, and then click on . 5. Forward y Select a message and then click on in the shortcut menu bar; y The content of the selected message will appear in the input field.
y Then right click mouse, to export SMS to the chosen location and saved as a *.txt file. Contacts Click contacts from the main interface of PC suite to access the contacts management. The contacts list column contains: (U) SIM /Modem /Computer. You can use contacts stored either on the (U) SIM, modem or on computer in the corresponding window. 1.
y y y Select one contact, or more (using ctrl/shift key) stored in the same memory; Right-Click your mouse pointer, if selected in the manual and select a target memory different from the memory being used; Contact(s) will be copied to the target memory. Settings Click on settings icon from the main interface of PC Suite. A menu with various settings will appear. 1. Network select y Select in the Settings menu.
a. Service Center: The default number is found in the (U)SIM card. You may change it. b. Validity period: You can choose between: 6 hours/1 day/1 week. c. Message Alert:- Click to validate the message alert sound. 5. Connection profile settings Select in the Settings menu to access the connection profile setting window.
6. System settings Click to validate the sound prompt when the Internet will be connected/ disconnected. 7. Request PIN y Click on the menu and select . Activate the PIN input dialog box; y Select and enter the correct PIN code; y Click on . 8. Change PIN y Click on , and activate the PIN modify dialog box; y Input the old PIN and the new PIN, then confirm; y Click on to confirm the new PIN code.
Warranty • The modem is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1. • Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on the modem, and present a proof of purchase. • The vendor or repair centre will decide whether to replace or repair, as appropriate the modem.
• • • The modem is also warranted against hidden defects (defects inherent in the design, manufacture, etc.). There are other express warranties than this printed limited warranty, express or implied, of any nature whatsoever. In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law.
3. Hardware problem. You may: 1. Try to logon from another location; 2. Update the software; 3. Check the hardware or use another data card and retry. 6. Q: Why does the prompt “No available connection profile. Please set an available default one in connection profile” appear? A: Please add a connection profile manually. 7. Q: It failed to connect to the internet A: Please make sure the connection profile and settings are correct. 8.
double-click the file HSPA USB MODEM.pkg 2. Click Continue 3.
4. When the installation is finished, you will see the following window, you need to restart your computer to use the modem. 5. Clicking Application>HSPA USB MODEM to start the connect application. You may install this application in the Dock to access it faster.
One Touch X210X Production Characteristic - Zero CD ROM, Auto Installation - UMTS 850/1900/2100 MHz - Downlink upto 7.2Mbps, Uplink upto5.76Mbps - Micro SD upto 16GB - SMS - Support Window 2000/XP/Vista/7; Mac OS X10.4.9 or higher The modem is a transceiver that operates on GSM networks with 850, 900, 1800 and 1900 MHz and on WCDMA 850, 1900 and 2100 MHz bands.
world health Organisation advises as a precautionary measure to use the modem in a good way. It is also advised to keep the modem away from the belly of pregnant women and from the lower abdomen for teenagers. ----------------------------------------------------------------------------------------------------------------Note : you’re the modem has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
One Touch X210D Production Characteristic - Zero CD ROM, Auto Installation - UMTS 900/2100 MHz - Downlink upto 7.2Mbps, Uplink upto5.76Mbps - Micro SD upto 16GB - SMS - Support Window 2000/XP/Vista/7; Mac OS X10.4.9 or higher The modem is a transceiver that operates on GSM networks with 850, 900, 1800 and 1900 MHz and on WCDMA 900 and 2100 MHz bands.
level over the entire range of frequency bands. Although the SAR was established at the highest certified level, the actual SAR level for the modem during use is generally much lower than the maximum values. In fact, since modems are designed to operate at many different power levels, they only use the minimum level of power required to provide a connection to the network. In theory, the closer you are to a base station antenna, the lower the power level required by the modem.
Do not allow the modem to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc). The manufacturer’s recommended operating temperature range is -10°C to +50°C. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with HSPA Modem.
