User Manual Table of Contents Safety and Use ...................................................................................................................... 2 Installation Guide ................................................................................................................. 4 Main Interface Overview ................................................................................................... 4 Entrance to Main Interface .........................................................
Safety and Use We recommend that you read this chapter carefully before using the modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the modem or of use contrary to the instructions contained herein. Traffic Safety When driving, do not use the modem When switched on, the modem emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags.
Do not open, dismantle or attempt to repair the modem yourself. Do not drop, throw or bend the modem. Do not paint the modem. Collection Point: This symbol on the modem means that it must be taken to collection points at the end of their life: Municipal waste disposal centers with specific bins for these items of equipment Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused.
Installation Guide Installation procedures may vary based on the operating system installed on your PC. The following instructions are based on the Windows XP OS: Turn on your PC and plug the modem into the USB interface slot to begin software installation. Windows should automatically detect the new device and will prompt you to begin installation. After following the prompts of installation setup, upon completion, a shortcut will be placed on your desktop for quick future access. Note: 1.
Following table are listed the Icons of status bar information Connection Statistics Icon Description Network Signal Indicates the signal strength of the network Network Status Indicates the network status. This will display the operator name which the modem can find the network. Or show the modem haven’t ready.
correct PIN code; after three incorrect attempts, the USIM or SIM card will be blocked. A PUK dialog box will then be displayed asking you to enter the right PUK code, PIN Code and Confirmed PIN. Click on if you fail to input the correct PUK code after 10 attempts, you will need to contact your service provider. If the PUK and PIN code is correct, the application will be launched and all features are enabled Connect to Internet 1.
Auth type information from networks provider. SMS Services (Text Message) Click SMS icon from the main interface of the PC suite to access the SMS service. 1. Displaying the received SMS When a new message is received, a message box appears in the status bar. . Click the content of the chosen message. You may also display the content on the message window. Note: Received SMS will be saved your modem. If the modem Memory is full, the message will saved on USIM/SIM y 2.
y y Access the draft list to select a message, and open it by double-clicking on it; Click on or when you have finished editing. 7. Delete y Select a message, or several messages (using the ctrl/shift key); y Click on in the tool bar. A dialog box will ask “Are you sure to delete the message(s)?” y Click on and the SMS will be deleted. Once deleted, SMS messages cannot be restored. 8.
will not be restored. 4. Send SMS y Select one contact or more (using ctrl/shift key); y Click on in the tool bar; y When the message is completed, you may send it by clicking on . 5. Copy to (U) SIM card/Modem/Computer y Select one contact, or more (using ctrl/shift key) stored in the same memory; y Right-Click your mouse pointer, if selected in the manual and select a target memory different from the memory being used; y Contact(s) will be copied to the target memory.
4. SMS settings Choose in the Settings menu to access the SMS settings window. a. Service Center: The default number is found in the (U)SIM card. You may change it. b. Validity period: You can choose between: 6 hours/1 day/1 week. c. Message Alert - Click to validate the message alert sound. 5. Connection profile settings Select in the Settings menu to access the connection profile setting window.
6. System settings Click to validate the sound prompt when the Internet will be connected/ disconnected. 7. Request PIN y Click on the menu and select . Activate the PIN input dialog box; y Select and Enter the correct PIN code; y Click on . 8.
Warranty • The modem is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1.
• • • • Warranty is also excluded for the modem on which markings or serial numbers have been removed or altered. The modem is also warranted against hidden defects (defects inherent in the design, manufacture, etc.) There are other express warranties than this printed limited warranty, express or implied, of any nature whatsoever.
3. Check the hardware or use another data card and retry. 6. Q: Why does the prompt “No available connection profile. Please set an available default one in connection profile.” appear？ A: Please add a connection profile manually. 7. Q: It failed to connect to the internet A: Please make sure the connection profile and settings are correct. 8. Q: The connection speed and data transfer rates are too slow A: Please check the local network signal strength. 9.
2. Click Continue 3.
4. When the installation is finished, you will see the following window, you need to restart your computer to use the modem. 5. Clicking Application>HSPA USB MODEM to start the connect application. You may install this application in the Dock to access it faster.
Radio Waves: Proof of compliance with international standards (ICNIRP) or with European Directive 1999/5/EC (R&TTE) is required of all Modem models before they can be put on the market. The protection of the health and safety for the user and any other person is an essential requirement of these standards or this directive. THIS MODEM COMPLIES WITH INTERNATIONAL AND EUROPEAN REQUIREMENTS REGARDING EXPOSURE TO RADIO WAVES. The Modem is a radio transmitter/receiver.
For body-worn operation, the modem meets EU exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 1.5cm from the body. The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of modems.
