User Guide

OmniVista SafeGuard Manager Administration Guide
99
Chapter 5: Device Configuration
Figure 60 New Device Dialog Box
4 Enter the following device attributes:
Table 18 Add Device Attributes
Attribute Description
IP Address The Management IP address of the device.
SNMP Community
String (Read)
Simple Network Management Protocol (SNMP) read
community name that was configured when the
device was initially set up.
SNMP Community
(Read/Write)
SNMP read/write community name that was
configured when the device was initially set up.
Name Device name.
Region Name of the region in which the device is located.
Building Name of the building in which the device is located.
Enable Application
Flow Collection
Click this box if you want to collect application flow
data.
Associated Template Select a template from the pull-down list that you
want to associate with the device. For more
information on templates, see Templates.