User Guide

OmniVista SafeGuard Manager Administration Guide
145
Chapter 5: Device Configuration
Upgrade Software
To upgrade a software image:
1 Select Device Actions > Manage Software > Upgrade Software (Ctrl+Shift+U) from
the Config Management window. Or, right-click on any device and select Device
Actions > Distribute Image. The Software Upgrade dialog box displays (Figure 92).
Figure 92 Software Upgrade Dialog Box
2 Enter the information as shown below:
Table 35 Software Upgrade Dialog Box Attributes
Column Name Description
Select Device Select the Select Device checkbox to upgrade all
devices in the list. You can upgrade on a per device
basis by selecting the checkbox next to each device.
Device Displays the device name with its IP address.
Model Specifies the type of device: controller or switch. The
software images displayed in the “Next Software
Image” column depend on the device type.
Running Software Image Shows the current software image that is running on the
device.
Upgrade Image Shows the software image to be copied to the device.
Boot Select this checkbox if you want to boot the device
after the image is copied. Default is for all devices to be
booted after a software upgrade.