User Guide

OmniVista SafeGuard Manager Administration Guide
126
Chapter 5: Device Configuration
Figure 78 New LDAP Server
2 Enter information in the user-configurable fields as follows:
3 Click OK to apply and save the server settings.
4 Select an existing LDAP server and click Delete in the Action Bar to delete the
selected server. A confirmation dialog box displays asking for verification.
5 Select an existing LDAP server and click Edit in the Action Bar to modify the
server settings.
Table 30 New LDAP Server Attributes
Attribute Name Description
IP Address Enter an IP address for the LDAP server.
Use SSL Select the checkbox if you want LDAP to use the
Secure Socket Layer (SSL) encryption to secure data
transmissions.
Port Number Use the up/down arrows to specify a port number for
the LDAP server.
Domain Name Enter an alphanumeric name for the domain name.
Bind DN Enter a distinguished name to be used in the LDAP
bind.
Base DN Enter a distinguished name.
Password Enter a password for the LDAP server.
Timeout (seconds) Use the up/down arrows to select timeout in seconds.