User Guide

OmniVista SafeGuard Manager Administration Guide
117
Chapter 5: Device Configuration
Traffic To/Destination Type Select a destination type to which you want to restrict
traffic. Following values are available:
■ Any—any destination type
■ IP Address—destination type with this IP address
■ IP Address/Mask—destination type with this IP
address and mask
■ IP Address Range—destination type with this IP
address range
■ MAC Address—destination type that with this MAC
address
■ MAC Address/Mask—destination type with this MAC
address and mask
■ Network Zone—destination type that belongs to this
network zone
Traffic Match Criteria 1 Depending on your selection in this field, the traffic
match criteria will display different fields. Following
values are available:
■ Any—any application protocol
■ TCP—matches the criteria for Transport Control
Protocol (TCP). If you select TCP, additional fields are
displayed for specifying the operation (less than,
equal to, and so forth) and the port number.
■ UDP—matches the criteria for User Datagram
Protocol (UDP). If you select UDP, additional fields
are displayed for specifying the operation (less than,
equal to, and so forth) and the port number.
■ Application Group—matches the criteria for the
specified application group. If you select
Application Group, a dropdown list of application
group you defined earlier is displayed. For more
information on specifying application groups, see
Application Groups on page 103.
■ Application Filter—matches the criteria for the
specified application filter. If you select Application
Filter, a dropdown list of application filters you
defined earlier is displayed. For more information on
specifying application filters, see Application Filters
on page 105.
Additional Traffic Match
Criteria
This field is configurable only if you select TCP or UDP as
the traffic match criteria. When you do so, you get a
dropdown list of traffic matches (application group,
application filter). Select the application group or filter
you want to use as a policy filter.
Table 25 Policy Filter Attributes (continued)
Attribute Name Description