User Guide

OmniVista SafeGuard Manager Administration Guide
108
Chapter 5: Device Configuration
4 Specify the network zone attributes as follows:
5 Click OK. The network zone element displays in the Elements field of the New
NetworkZone dialog box (Figure 66).
6 Click OK on the New NetworkZone dialog box to create a new network zone. The
network zone is added and displayed under the Network Zones object in the
navigation tree. You can add more than one network zones using the same
process.
7 Select a network zone element and click Edit to change the values of an existing
network zone element.
8 Select a network zone element and click Delete to remove a zone element. Select a
network zone element and click Edit to change the values of an existing network
zone element.
9 Select a network zone element and click Delete to remove a zone element.
10 Select a network zone element and click Copy to clone the attributes of the
selected element.
Table 22 Network Zone Elements Attributes
Attribute Description
Type Select a network type from the Type dropdown list, Host
IP, Network, IP Range, Host MAC, MAC Mask.
IP Address Depending on what you selected in the Type field,
enter the IP or the MAC address.