060220-00 Rev. A June 2007 OmniSwitch Transceivers Guide www.alcatel-lucent.
This user guide contains SFP and XFP transceiver specifications and compatibility information for the OmniSwitch 6800, 6850 and 9000 Series of switches. The information described in this guide is subject to change without notice. Copyright © 2007 by Alcatel-Lucent. All rights reserved. This document may not be reproduced in whole or in part without the express written permission of Alcatel-Lucent. Alcatel-Lucent® and the Alcatel-Lucent logo are registered trademarks of Alcatel-Lucent.
Contents About This Guide ........................................................................................................... v Supported Platforms ........................................................................................................... v Who Should Read this Manual? ........................................................................................ vi When Should I Read this Manual? ....................................................................................
Contents Chapter 4 XFP Compatibility Matrix ........................................................................................ 4-18 OmniSwitch 9000 Series ...............................................................................................4-18 OmniSwitch 6850 Series ...............................................................................................4-18 OmniSwitch 6800 Series ...............................................................................................
About This Guide This OmniSwitch Transceivers Guide provides specifications and compatibility information for the supported OmniSwitch SFP and XFP transceivers.
Who Should Read this Manual? About This Guide Who Should Read this Manual? The audience for this user guide is network administrators and IT support personnel who need to provide network connectivity using SFP or XFP transceivers on an OmniSwitch. When Should I Read this Manual? Read this guide as soon as you are ready to integrate your OmniSwitch into your network and you are ready to provide connectivity using the supported transceivers.
About This Guide How is the Information Organized? How is the Information Organized? Chapters in this guide are broken down by transceiver type, SFP or XPF. Additional sub-sections are provided for the various types of SFP transceivers. Specification Information. Each transceiver has an associated table providing individual specifications for all supported transceivers. Compatibility Information.
Documentation Roadmap About This Guide Stage 3: Integrating the Switch Into a Network Pertinent Documentation: Network Configuration Guide Advanced Routing Configuration Guide When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing protocols.
About This Guide Related Documentation Related Documentation The following are the titles and descriptions of all the related OmniSwitch 6800/6850/9000 user manuals: • OmniSwitch 6800 Family Getting Started Guide Describes the hardware and software procedures for getting an OmniSwitch 6800 Family switch up and running. Also provides information on fundamental aspects of OmniSwitch software and stacking architecture.
Related Documentation About This Guide • OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide Includes network configuration procedures and descriptive information on all the software features and protocols included in the advanced routing software package. Chapters cover multicast routing (DVMRP and PIM-SM), and OSPF. • OmniSwitch Transceivers Guide Includes SFP and XFP transceiver specifications and product compatibility information.
About This Guide User Manual CD User Manual CD All user guides are included on the User Manual CD that accompanied your switch. This CD also includes user guides for other Alcatel-Lucent data enterprise products. In addition, it contains a stand-alone version of the on-line help system that is embedded in the OmniVista network management application. Besides the OmniVista documentation, all documentation on the User Manual CD is in PDF format and requires the Adobe Acrobat Reader program for viewing.
Technical Support page xii About This Guide OmniSwitch Transceivers Guide June 2007
1 Small Form-Factor Pluggables (SFPs) OmniSwitch Series switches use both copper-based and fiber-based optical Small Form Factor Pluggable (SFP) transceivers. SFPs are fully hot-swappable and are available for both short-reach and long-reach applications. Copper-based and fiber-based optical SFPs can be mixed on the same module. In This Chapter This chapter describes the technical specifications for all the OmniSwitch supported SFP transceivers.
SFP MSA Specification Small Form-Factor Pluggables (SFPs) SFP MSA Specification The Small Form-Factor Pluggable (SFP) MSA (Multi Source Agreement) is a specification for a common interface for optical modular transceivers. The SFP connector consists of a 20-pin receptacle and an SFP housing cage. The connector provides the interface for the hot pluggable SFP module.
Small Form-Factor Pluggables (SFPs) Gigabit Ethernet Transceivers Gigabit Ethernet Transceivers SFP-GIG-SX 1000Base-SX Gigabit Ethernet optical transceiver. Supports multimode fiber and uses an LC connector. Connector Type LC Standards Supported 802.3z, SFP MSA Connections Supported 1000Base-SX Fiber Type MMF Wavelength 850 nm Optical Power Output -9.5 to -4 dBm Receiver Sensitivity -17 dBm Transmission Distance ~300 m on 62.
Gigabit Ethernet Transceivers Small Form-Factor Pluggables (SFPs) Gigabit Ethernet Transceivers (cont.) SFP-GIG-LH70 1000Base-LH Gigabit Ethernet optical transceiver. Supports single mode fiber and uses an LC connector. Connector Type LC Standards Supported 802.
Small Form-Factor Pluggables (SFPs) Gigabit Ethernet Transceivers Gigabit Ethernet Transceivers (cont.) SFP-GIG-EXTND Extended 1000Base-SX Gigabit Ethernet optical transceiver. Supports multimode fiber and uses an LC connector. Connector Type LC Standards Supported 802.
Dual-Speed Ethernet Transceivers Small Form-Factor Pluggables (SFPs) Dual-Speed Ethernet Transceivers SFP-DUAL-MM Dual Speed 100Base-FX or 1000Base-LX Ethernet optical transceiver. Supports multimode fiber and uses an LC connector. Connector Type LC Standards Supported 802.3z, 802.3ah, SFP MSA Connections Supported 100Base-FX, 1000Base-LX Fiber Type MMF Wavelength 1310 nm Average Power Output 100Base-FX: -20 to -14 dBm 1000Base-LX: -11.
Small Form-Factor Pluggables (SFPs) Bi-directional 100 FX Ethernet Transceivers Bi-directional 100 FX Ethernet Transceivers SFP-100-BX20LT 100Base-BX SFP optical transceiver with an SC type interface. This bi-directional transceiver is designed for use over single mode fiber on a single strand. Connector Type SC Standards Supported 802.3ah, SFP MSA, ITU-T G.
100 FX Ethernet Transceivers Small Form-Factor Pluggables (SFPs) 100 FX Ethernet Transceivers SFP-100-LC-MM 100Base-FX SFP optical transceiver with an LC type interface. This transceiver is designed for use over multimode fiber. Connector Type LC Standards Supported 802.
Small Form-Factor Pluggables (SFPs) 100 FX Ethernet Transceivers 100 FX Ethernet Transceivers (cont.) SFP-100-LC-SM40 100Base-FX SFP optical transceiver with an LC type interface. This transceiver is designed for use over single mode fiber. Connector Type LC Standards Supported 802.
CWDM Gigabit Ethernet Transceivers Small Form-Factor Pluggables (SFPs) CWDM Gigabit Ethernet Transceivers . SFP-GIG-CWD Coarse Wavelength Division Multiplexing (CWDM) is an optical transceiver supporting single-mode fiber over various wavelengths. CWDMs are hot-pluggable and are available for long-reach applications. Connector Type LC Standards Supported 802.
10-Gigabit Small Form Factor Pluggables (XFPs) 2 In This Chapter 10-Gigabit Small Form Factor Pluggables (XFPs) 10-Gigabit Small Form Factor Pluggables (XFPs) are fiber-based optical transceivers. XFPs are fully hotswappable and are available for both short-reach and long-reach applications. In This Chapter This chapter describes the technical specifications for all the OmniSwitch supported XFP transceivers. For additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
XFP MSA Specification 10-Gigabit Small Form Factor Pluggables (XFPs) XFP MSA Specification The 10-Gigabit Small Form-Factor Pluggable (XFP) MSA (Multi Source Agreement) is a specification for a common interface for optical modular transceivers. The XFP connector consists of a 30-pin receptacle and an XFP housing cage. The connector provides the interface for the hot pluggable XFP module.
10-Gigabit Small Form Factor Pluggables (XFPs) 10-Gigabit Ethernet Transceivers 10-Gigabit Ethernet Transceivers 10G-XFP-SR 10GBase-SR XFP optical transceiver with an LC type interface. This transceiver is designed for use over single mode fiber. Connector Type LC Standards Supported 802.3ae, XFP MSA Connections Supported 10GBase-SR Fiber Type MMF Wavelength 850 nm Optical Power Output -4.2 to -3.6 dBm Receiver Sensitivity -1.
10-Gigabit Ethernet Transceivers 10-Gigabit Small Form Factor Pluggables (XFPs) 10-Gigabit Ethernet Transceivers (cont.) 10G-XFP-ER 10GBase-ER XFP optical transceiver with an LC type interface. This transceiver is designed for use over single mode fiber. Connector Type LC Standards Supported 802.3ae, XFP MSA Connections Supported 10GBase-ER Cable Type SMF Wavelength 1550 nm Optical Power Output -1 to +2 dBm Receiver Sensitivity -16 dBm Transmission Distance ∼ 40 km Power Consumption <3.
SFP Compatibility Matrix 3 OmniSwitch 9000 Series SFP Compatibility Matrix OmniSwitch 9000 Series The following table shows the Ethernet transceiver configurations and supported releases on the OmniSwitch 9000 Series: SFP OS9-GNI-C20L OS9-GNI-U24 SFP-GIG-SX 6.1.5 All SFP-GIG-LX 6.1.5 All SFP-GIG-LH40 6.1.5 All SFP-GIG-LH70 6.1.5 All SFP-GIG-EXTND 6.1.5 All SFP-GIG-CWD 6.1.5 All SFP-GIG-T 6.1.5 6.1.3 SFP-DUAL-MM 6.1.5 6.1.3 SFP-DUAL-SM10 6.1.5 6.1.3 SFP-100-BX20LT 6.1.
OmniSwitch 6850 Series SFP Compatibility Matrix OmniSwitch 6850 Series The following table shows the Ethernet transceiver configurations and supported releases on the OmniSwitch 6850: SFP OS6850 Combo Ports OS6850-U24X SFP-GIG-SX All 6.1.3 SFP-GIG-LX All 6.1.3 SFP-GIG-LH40 All 6.1.3 SFP-GIG-LH70 All 6.1.3 SFP-GIG-EXTND All 6.1.3 SFP-GIG-CWD All 6.1.3 SFP-GIG-T All 6.1.3 SFP-DUAL-MM not supported 6.1.3 SFP-DUAL-SM10 not supported 6.1.3 SFP-100-BX20LT not supported 6.1.
SFP Compatibility Matrix OmniSwitch 6800 Series OmniSwitch 6800 Series The following table shows the Ethernet transceiver configurations and supported releases on the OmniSwitch 6800 Series: SFP OS6800 Combo Ports OS6800-U24 SFP-GIG-SX All All SFP-GIG-LX All All SFP-GIG-LH40 All All SFP-GIG-LH70 All All SFP-GIG-EXTND All All SFP-GIG-CWD All All 6.1.3 6.1.3 SFP-DUAL-MM not supported 6.1.3 SFP-DUAL-SM10 not supported 6.1.
OmniSwitch 9000 Series 4 XFP Compatibility Matrix XFP Compatibility Matrix OmniSwitch 9000 Series The following table shows the 10-Gigabit Ethernet transceiver configurations and supported releases on the OmniSwitch 9000 Series: XFP OS9-XNI-U2 OS9-XNI-U6 10G-XFP-SR All All 10G-XFP-LR All All 10G-XFP-ER All All 10G-XFP-ZR All All OmniSwitch 6850 Series The following table shows the 10-Gigabit Ethernet transceiver configurations and supported releases on the OmniSwitch 6850: XFP All OmniSw
XFP Compatibility Matrix OmniSwitch 6800 Series OmniSwitch 6800 Series The following table shows the 10-Gigabit Ethernet transceiver configurations and supported releases on the OmniSwitch 6800: SFP All OmniSwitch 6800 10-Gigabit Models 10G-XFP-SR All 10G-XFP-LR All 10G-XFP-ER All 10G-XFP-ZR All OmniSwitch Transceivers Guide June 2007 page 4-19
OmniSwitch 6800 Series page 4-20 XFP Compatibility Matrix OmniSwitch Transceivers Guide June 2007
