User Guide

Installing Your Switch 3
b. Gently unlock the two card ejectors (one on
each end of the module) by pressing them out
and away from the module.
c. Holding the module firmly in both hands, care-
fully slide it out of the chassis along the card
guide. The module should slide out easily. A
large amount of force is not necessary and
should not be used.
d. Repeat the above steps for all switch modules. If
you are rack or wall mounting the switch, you
should store the removed modules and power
supplies in a safe, anti static place and skip to
Step 3. If you are not rack or wall mounting the
switch, re-install the modules as described in the
next section.
Card Guides
Switching Module
Slide Card Out