User Guide

2 Installing Your Switch
A flat blade screwdriver is required for installing and
removing switching modules . In a chassis with horizon-
tal slots, the slots are numbered sequentially with slot 1
being the topmost slot. In a chassis with vertical slots,
the slots are numbered sequentially with slot 1 being
the leftmost slot.
♦ Anti-Static Warning ♦
Before handling any module, free your
hands of static by wearing a ground-
ing strip or by grounding yourself
properly. Static discharge can damage
the components on the module.
Removing the Modules
To remove a module, follow these instructions:
a. Loosen the screw fasteners at the top and bottom
of the module using a flat blade screwdriver.