User Guide

ALC ETL
Alcatel OmniPCX 4400
SBC Alcatel 4059 Section 4 - SBC Alcatel 405 9
Customized management
2. Enter the name or IP address of the LDAP server.
3. Click the box if t he connection to the LDAP server requires access rights (name and pasword ).
4. Enter the name and the p assword used fo r the connection to the LDAP server (only if the box
3
is activated).
5. Enter the port number of the connection to the LDAP server (389 by default).
6. Enter d ata allowing a more precise search in the requested directory. This is a strin g of characters,
as shown below:
Example: o=ALCATEL c orresponds to the follo wing syntax: o (organization) = company.
7. Confirm by clicking “OK” .
Once this last operation is complete, the applicati o n checks the param eters ente red and availabil ity
of the requested server. If the configuration is accedted, the main screen is re-displayed. Otherwise,
repeat the procedure desc ribed above while checking that the server used is available.
Note: Once management of the directory has been carried out, it is necessary to go at least once to
the “Search Configuration” menu presented to the § 5 : Ot her LDAP and OBCD directory management
operations § 5 : Other LDAP and OBCD directory management operations
3.2. Modif ying
Add/Delete a n LDAP directory... tab in the main window. The "LDAP directory configuration" w indow
is opened with the settings for the existing LDAP directory.
Modify the fields required, then confirm by clicki ng OK.
3.3. Delete
Add/Delete a n LDAP directory... tab in the main window. The "LDAP directory configuration" w indow
is opened with the settings for the existing LDAP directory.
Delete the connection to the LDAP directory by using the “Cancel...” button. .
4. Configuring ODBC directories
4.1. Add
Add/Delete an LDAP directory... tab in the main window. The following window opens:
4.22 Ref.3BA19919ENAA Ed.03