User Guide

OmniAccess RF Plan User Guide: User Guide
12 Part 031649-00 May 2005
AP Modeling Page
The AP Modeling page allows you to specify all the information necessary for
RF Plan to determine the appropriate placement of your APs.
Controls on this page allow you to select or control the following functions,
each of which is described in further detail in the following sections:
z Units Specify the units of measurement for the dimensions
you specified on the page. The choices are feet and
meters.
z Radio Type Use this pull-down menu to specify the radio type.
z Overlap Factor Use this field and pull-down to specify an overlap factor.
z Design Model Use these radio buttons to specify a design model to
use in the placement of Access Points.
z Rates Use this pull-down to specify the data rates desired on
Access Points.
z Users Use this field to specify the number of users on your
Wireless LAN.
z AP Type Use this drop box to select the type of Access Point.
Choose AP 60, AP 61 or AP 70.