User Guide

Configuring Wireless LANs 49
Chapter 6
Configuring Wireless LANs—Advanced
While the above two sections deal with global AP configurations, individual
AP can be configured with specific settings using the Advanced tab under
Wireless LAN. Each of the APs are identified by unique locations and these
locations are used to configure the AP uniquely.
The global configurations will be overridden by the location specific
configurations.
1. Navigate to the
Configuration > Wireless LAN > Radio > Advanced page..
2Click
Add to add a new location.
3 Enter a location ID of the format <bldg.floor.plan> where each of these is an
integer.
4Click
Add to add the location. Once the location ID is entered and applied,
the global configuration if any will get inherited to the location