User Guide

OmniAccess RN: User Guide
44 Part 031650-00 May 2005
z From the pull down menu select the key size – 10 hex characters or 26
Hex Characters.
z Type in the key as per the selection made. The characters should belong
to the set [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f]. The keys are case
insensitive.
z Click Apply to apply the configuration changes made and to prevent
loss of work before navigating to other pages.
Configuring TKIP Encryption
z Select the radio button to enable TKIP encryption. This opens the TKIP
dialog.
z Select PSK TKIP for static TKIP key configuration and WPA TKIP for
dynamic TKIP.
z If PSK TKIP is selected, the key can be hex or ASCII. Enter a 64 charac-
ter hex key or a 8 – 63 character ASCII key.
z From the pull down menu select the key size – 10 hex characters or 26
Hex Characters.
z Type in the key as per the selection made. The characters should belong
to the set [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f]. The keys are case
insensitive.
z Click Apply to apply the configuration changes made and to prevent
loss of work before navigating to other pages.
Configuring AES-CCM Encryption
NOTE—AES-CCM was formerly referred to as AES-CCMP.