User Guide

Configuring Wireless LANs 43
Chapter 6
Once the selection is made, the corresponding dialog windows will
open to allow the user to configure as per the selection.
Configuring NULL Encryption
If the encryption type selected is null or the open system then there will be no
encryption. The packets between the AP and the client would be in clear text.
Click the Apply tab to apply the configuration changes made and to prevent
loss of work before navigating to other pages.
Configuring WEP Encryption
z Select the radio button to enable WEP encryption. This opens the WEP
encryption dialog
z Select Static WEP or dynamic WEP.
z If Static WEP is selected, the user will have to enter a hex key that
would have to configured on the client.
z Click the Use as Tx Key radio button corresponding to the S. No of the
key to be used.