User Guide

Configuring Redundancy 25
Chapter 4
(Alcatel4324) (config-vrrp) #tracking master-up-time 30 add 20
(Alcatel4324) (config-vrrp) #no shutdown
The following shows the corresponding VRRP configuration for the peer
switch.
(Alcatel4324) (config) #vrrp 22
(Alcatel4324) (config-vrrp) #vlan 22
(Alcatel4324) (config-vrrp) #ip address 10.200.22.254
(Alcatel4324) (config-vrrp) #priority 100
(Alcatel4324) (config-vrrp) #preempt
(Alcatel4324) (config-vrrp) #authentication password
(Alcatel4324) (config-vrrp) #description Backup-Master
(Alcatel4324) (config-vrrp) #tracking master-up-time 30 add 20
(Alcatel4324) (config-vrrp) #no shutdown
Use the following steps to associate the VRRP instance with master switch
redundancy.
Command Explanation
Expected/recommen
ded Values
Step 1 master-redundancy Enter the
master-redundancy
context
N/A
Step 2
master-vrrp vr-id Associates a VRRP
instance with master
redundancy
VR-ID of the VRRP
instance configured in
step iii.
Step 3 peer-ip-address ip-address Loopback IP address
of the peer for
master redundancy
Loopback IP address of
the peer switch.