User Guide

Configuring Network Parameters 13
Chapter 3
1. Navigate to the
Configuration > Switch > Port page on the WebUI. Select the
port(s) to be configured by selecting the appropriate checkbox in the Port
Selection
section.
2 Select the
Trunk option to the Port Mode section.
3 Select
Allow all VLANs to assign all configured VLANs to this port. If the
desired list of VLANs is different from all configured VLANs, choose the
Allowed VLAN list option and add to the list of allowed VLANs and disal-
lowed VLANs as required.
4Click Apply to apply this configuration.
5 Verify VLAN membership is as configured by navigating to the
Configuration
> Switch > VLAN
page.