User Guide

OmniAccess RN: User Guide
20 Part 031650-00 May 2005
(6000) # configure t
(6000) (config) # ip access-list session control
(6000) (config-sess-control)# any any svc-icmp permit
(6000) (config-sess-control)# any any svc-dns permit
(6000) (config-sess-control)# any any svc-papi permit
(6000) (config-sess-control)# any any svc-adp permit
(6000) (config-sess-control)# any any svc-tftp permit
(6000) (config-sess-control)# any any svc-dhcp permit
(6000) (config-sess-control)# any any svc-natt permit
(6000) (config-sess-control)# exit
(6000) (config) # ip access-list session ap-acl
(6000) (config-sess-ap-acl)# any any svc-gre permit
(6000) (config-sess-ap-acl)# any any svc-syslog permit
(6000) (config-sess-ap-acl)# any user svc-snmp permit
(6000) (config-sess-ap-acl)# user any svc-snmp-trap permit
(6000) (config-sess-ap-acl)# user any svc-ntp permit
(6000) (config-sess-ap-acl)# exit
(6000) (config) # ip access-list session ftp-allow
(6000) (config-sess-ftp-allow)# user any svc-ftp permit
(6000) (config-sess-ftp-allow)# exit
4 Add Secure Remote Access Point Service user to the authentication server.
Enable the Alcatel VPN Authentication service. Configure the authentication
server and add the Secure Remote Access Point Service user/password into
the database to allow the Secure Remote Access Point Service user to
authenticate successfully.