User Guide

Secure Remote Access Points 17
Chapter 2
To configure PAP authentication for L2TP:
Make sure that PAP Authentication Protocol is selected. Click
Apply, to apply
the configuration changes made.
From the CLI enter:
(Alcatel4324)# config t
(Alcatel4324) (config)# vpdn group l2tp
(Alcatel4324) (config-vpdn-l2tp)# ppp authentication PAP
(Alcatel4324) (config-vpdn-l2tp)# exit
(Alcatel4324) (config)#
To configure the L2TP IP pool: