User Guide

OmniAccess RN: User Guide
16 Part 031650-00 May 2005
z Select the AP that needs to be configured to provide Secure Access Point
Services on the Program AP > Reprovision page. Configure the AP username
and password, and the IKE PSK for the IPSec settings. Set the master IP to
the public IP address if the AP is connected to the switch over the Internet.
z Regardless of the deployment type, Alcatel recommends that the LMS-IP of
the AP be set to the switch IP address, (either the loopback address of the
switch or the VLAN 1 IP address).
z Navigate to the Configuration > Wireless LAN > Advanced page. Select the AP
to be configured as a Remote Access Point. Configure the LMS-IP to the
Alcatel Wireless LAN switch IP address.
2 Configure the IPSec VPN settings on the switch by navigating to the
Config-
uration > Security > VPN Settings > IPSec
page.