User Guide

Topology Example Two 229
Chapter 17
layer3(config-if) #ip helper-address 10.200.14.14
; ADP relay
2 Configure the Wireless LAN parameters for the Wireless LAN network on
the Configuration > Network > SSID page. Click Edit to modify the parameters
of the default Wireless LAN network.
FIGURE 17-2 Configuring SSIDs
3 Configure the SSID of the network as desired (company-ssid in the exam-
ple). Select WEP as the encryption type and select both Static WEP and
Dynamic WEP. Also enter the static WEP key to be used, as shown below.
demo-a