User Guide

Topology Example One 223
Chapter 16
9 Configure the Wireless LAN network parameters on the
Configuration >
Wireless LAN > Network > SSID
page.
FIGURE 16-5 Configuring the SSID
10 Click Edit to change the parameters of the default Wireless LAN network.
Specify the following basic configuration:
z SSID (demo-Alcatel)
z Encryption type (Static WEP).
z WEP key.
11 Apply this configuration.
12 Enable the AP to accept association requests from clients by configuring
the maximum number of clients permitted on each Access Point. Configure
this parameter on the
Configuration > Wireless LAN > Radio page by increas-
ing the value of Max Clients from 0 to the required value (20 in this exam-
ple).