User Guide

OmniAccess RN: User Guide
208 Part 031650-00 May 2005
Configuring QoS for SVP
Follow the steps below to configure a role for phones using SVP and provide
QoS for the same.
1. Create a policy called “svp-policy” that allows only SVP traffic.
(Refer to the Configuring Firewall roles and policies for more details on how to
add a policy). If providing higher quality of service to the voice traffic, ensure
that the “high” priority option is selected for the rule allowing SVP traffic as
shown in the screen shot below. (Note: This is highly recommended when
deploying voice over Wireless LAN networks). If this option is not selected, no
QoS will be provided to the voice traffic.
2 Create a rule to allow SVP traffic with the high priority as show below.
3 Create a rule to allow TFTP traffic with low priority to allow for soft-
ware/firmware upgrades of the SVP phones/devices.