User Guide

OmniAccess RN: User Guide
200 Part 031650-00 May 2005
Description: This trap indicates an error in the SSID configuration of an Access
Point. The AP generates the trap and includes its BSSID, the configured SSID
and the location of the AP in the trap
Priority level: High
8 Short Preamble misconfiguration.
Description: This trap indicates an error in the Short Preamble configuration of
an Access Point. The AP generates the trap and includes its BSSID, the
configured SSID and the location of the AP in the trap. This check will be done
only if the short-preamble option is selected for the AP from the CLI or the
WebUI.
Priority level: High
9 AM misconfiguration.
Description: This trap indicates an error in the Short Preamble configuration of
an Access Point. The AP generates the trap and includes its BSSID, the
configured SSID and the location of the AP in the trap
Priority Level: High
10 Repeat WEP-IV violation.
Description: This trap indicates that the Air Monitor has detected a valid
station or a valid AP sending consecutive frames that has the same IV
(Initialization vector). This usually means that entity has a “flawed” WEP
implementation and is therefore a potential security risk.
Priority Level: High
11 Weak WEP-IV violation.
Description: This trap indicates that the Air Monitor has detected a valid
station or a valid AP sending frames with an IV that is in the range of IV that are
known to be cryptographically weak and therefore are a potential security risk.
Priority Level: High.
12 Adhoc networks detected.
Description: This trap indicates that the Air Monitor has detected Adhoc
networks.
Priority Level: High.
13 Valid station policy violation.