User Guide

OmniAccess RN: User Guide
196 Part 031650-00 May 2005
SNMP Traps from the Switch
The following is a list of key traps generated by the Alcatel Mobility Controller.
1
1. Switch IP changed.
Description: This indicates the switch IP has been changed. The Switch IP is
either the Loopback IP address or the IP address of the VLAN 1 interface (if no
loopback IP address is configured).
Priority Level: Critical
2 Switch role changed
Description: This indicates that the switch has transitioned from being a
Master switch to a Local switch or vice versa.
Priority Level: Critical
3 User entry created/deleted/authenticated/de-authenticated/authentication
failed.
Description: Each of these traps are triggered by an event related to a user
event. The event can be a new user entry being created in the user table,
deletion of a user entry, a user getting authenticated successfully, a user
getting de-authenticated, or a failed authentication attempt. Each of these
traps will be generated by the switch on which the user event occurs. In other
words this is a local event to the switch where the user is visible.
Priority Level: Medium.
4 Authentication server request timed out.
Description: This trap indicates that a request to a authentication server did
not receive a response from the server within a specified amount of time and
therefore the request timed out. This usually indicates a connectivity problem
from the Alcatel Mobility Controller to the authentication server or some other
problem related to the authentication server.
Priority Level: High.
5 Authentication server timed out
1.For a complete list of traps, refer to the Alcatel MIB Reference (0600059).