User Guide

Intrusion Detection 181
Chapter 13
Configuring Weak WEP Detection
1. To configure detection of weak WEP implementations, navigate to
Configuration > Wireless LAN Intrusion Detection > Policies > Weak WEP, as
shown in the figure below.
2 Select the option to “Detect APs and Clients Using Weak WEP IV” to
enable this feature.
Configuring Multi-Tenancy Detection
To configure multi-tenancy policies, navigate to Configuration > Wireless LAN
Intrusion Detection > Policies > Multi Tenancy
, as shown in the figure below.
8. Valid Access Point
Manufacturers OUI List
(OUIs must be entered in
the format xx:xx:xx:xx:xx:xx
where x
is a hexadecimal number, f
being the wildcard)
A list of MAC address OUIs that define valid
AP manufacturers. Any valid AP with a
differing OUI will be flagged as
misconfigured.