User Guide

OmniAccess RN: User Guide
180 Part 031650-00 May 2005
The table below describes the fields shown in this section.
Field Description
1. Detect Misconfigured
Access Points
Enable/disable the misconfigured AP
detection feature.
2. Disable Detected
Misconfigured Access
Points
When valid APs are found that violate the list
of allowable parameters, prevents clients
from associating to those APs using a denial
of service attack.
3. Valid Enterprise 802.11b/g
Channels
Defines the list of valid 802.11b/g channels
that 3
rd
-party APs are allowed to use.
4. Valid Enterprise 802.11a
Channels
Defines the list of valid 802.11a channels
that 3
rd
-party APs are allowed to use.
5. Prevent Clients from
roaming to interfering APs
If a valid enterprise client attempts to
associate with an AP classified as
“interfering”, the system will break the
association using a denial of service attack.
6. Enforce WEP Encryption for
all Traffic
Any valid AP not using WEP will be flagged
as misconfigured.
7. Enforce WPA Encryption for
all Traffic
Any valid AP not using WPA will be flagged
as misconfigured.