User Guide

OmniAccess RN: User Guide
172 Part 031650-00 May 2005
The following table describes each of the fields in this section.
1. To configure Sequence number analysis, click the
Sequence Number.
The following table gives a brief description of the fields in this section.
Field Description
1. Enable EAP Handshake
Analysis
Enables or disables this feature.
2. EAP Handshake Threshold The number of EAP handshakes that
must be received within the EAP Time
Interval in order to trigger an alarm.
3. EAP Time Interval (secs) The time period in which a configured
number of EAP handshakes must be
received.
4. EAP Rate Detection Quiet
Time (secs)
After an alarm has been triggered, the
amount of time that must pass before
another identical alarm may be triggered.
Field Description
1. Enable Sequence Number
Discrepancy Checking
Enables or disables this feature.
2. Sequence Number Difference
Threshold
The maximum allowable tolerance
between sequence numbers within a
specific time interval.
3. Sequence Number Checking
Time Tolerance (msec)
The time interval in which sequence
numbers must exceed the sequence
number difference threshold in order
for an alarm to be triggered.