User Guide

Intrusion Detection 171
Chapter 13
Configuring Man-In-The-Middle Attack Detection
Navigate to the Configuration > Wireless LAN Intrusion Detection >
Man-In-The-Middle
page on the WebUI of the Master switch. Select the required
tab to configure each of the following:
1. To configure station disconnection detection, click
Disconnect Station.
The following table gives a brief description of the fields in this section.
1. To configure EAP Handshake analysis, click the EAP Handshake.
Field Description
1. Enable Disconnect Station
Analysis
Enables/disables this feature.
2. Disconnect Station
Detection Quiet Time
(secs)
After a station disconnection is
detected, the amount of time that must
pass before another identical alarm can
be generated.