User Guide

OmniAccess RN: User Guide
170 Part 031650-00 May 2005
To configure the Fake AP detection, select the Fake AP tab on the Configuration
> Wireless LAN Intrusion Detection > Denial of Service
page.
The table below summarizes the meaning of each of the fields in this section.
3. Channel/node Quiet
time
After an alarm has been triggered, specifies
the amount of time that must elapse before
another identical alarm may be triggered. This
option prevents excessive messages in the log
file.
Field Description
1. Enable Fake AP Flood
Detection
Enables or disables the feature
2. Flood Inc Time (secs) The time period in which a configured
number of FakeAP beacons must be
received.
3. Flood Threshold The number of FakeAP beacons that
must be received within the Flood Inc
Time in order to trigger an alarm.
4. Quiet Time (secs) After an alarm has been triggered, the
amount of time that must pass before
another identical alarm may be
triggered.