User Guide

OmniAccess RN: User Guide
8 Part 031650-00 May 2005
z Enter the location code in the format explained above.
z If the AP being provisioned is a model with detachable antenna
capability (such as an Alcatel AP-60) enter the antenna gain in dBi,
for example 4.0. This is mandatory for all detachable antenna models
as the AP will not will bring up its radio interface or function as an
AP without it.
z Click Apply to apply the configuration to the AP.
NOTE—The configuration does not take effect until the AP is rebooted.
z Navigate to the Maintenance > Reboot AP page.
z Select the AP from the list of the APs and click Reboot to reboot the
AP.
z Navigate to the Maintenance > Program AP > Re-provision page to
confirm that the new settings have taken effect.