User Guide

OmniAccess RN: User Guide
148 Part 031650-00 May 2005
4 Configure the IKE Shared Secret and Verify IKE Shared Secret.
5Click
Done to apply the configurations.
6Click
Back to return to the main VPN L2TP configuration page.
IKE Policies
1. Click Add under IKE Policies opens the IPSEC Policy configuration page.
2 Set the
Priority to 1 for this configuration to take priority over the Default
setting
3 Set the
Encryption type to DES or 3DES.
4 Set the HASH Algorithm to SHA or MD5.
5 Set the
Authentication to Pre-Share or RSA.
6 Set the
Diffie Helman Group to 1 or 2.
7
The configurations from 1 through 5 along with the pre-share key
need to be reflected in the VPN client configuration. When using a
3
rd
party VPN client, set the VPN configuration on clients to match
the choices made above. In case the Alcatel dialer is used, these
configuration need to be made on the dialer prior to downloading
the dialer onto the local client
.
8Click
Apply to activate the changes.
9Click
Back to return to the main VPN L2TP configuration page.
10 Click
Apply to apply the changes made before navigating to other pages.
Configuring VPN with PPTP Example
The following pre-requisites must be configured:
1. The steps in “Enabling VPN Authentication” must be completed along with
the PPTP configuration to use PPTP.
2 Enable VPN Authentication as described in the previous section “Enabling
VPN Authentication”.
3 Navigate to the
Configuration > Security > VPN Settings > PPTP page