User Guide

Configuring Virtual Private Networks 147
Chapter 12
8Click
Add. The Add Address Pool page appears.
9 Specify the start address, the end address and the pool name.
10 Click Done on the completion to apply the configuration.
Enabling Src NAT
In case the users need to be nated to access the network the use this option.
The pre-requisite for using this option is to have a NAT pool which can be
created by navigating to the
Security > Advanced > NAT Pools page.
IKE Shared Secrets
Set the value of the IKE key. The key can be configured by subnet. This can be
done by specifying the subnet and subnet mask. Care should be taken to
ensure that this key matches the key on the client.
To make the key a global key:
1. Specify the address as 0.0.0.0 and netmask as 0.0.0.0.
2 Under IKE Shared Secrets click Add. This will open the Add IKE Secret page.
3 Configure the Subnet and Subnet mask. To make the IKE key global spec-
ify 0.0.0.0 and 0.0.0.0 for both the values.