User Guide

Configuring Virtual Private Networks 145
Chapter 12
5 The servers appear in the order of descending priority. The first entry is
always the primary server. To change the order, use the S or T to the right
on the entry to move it higher up or lower down in the list.
6Click
Apply to apply the configuration changes made before navigating to
other pages to avoid losing the changes made.
7Click
Save Configuration to save the configuration between reboots.
Configuring VPN with L2TP IPSec
The following pre-requisites must be configured:
1. The steps in the “Enabling VPN Authentication” must be completed along
with the L2TP IPSec configuration to enable VPN.
2 Enable VPN Authentication as mentioned in the previous section.
3 Navigate to the
Configuration > Security > VPN Settings > IPSEC page.