User Guide

OmniAccess RN: User Guide
136 Part 031650-00 May 2005
z In the User Name field, enter the MAC-address of the device to be used,
(this is the MAC-address of the physical interface that will be used to
access the network). The entry should be in xx:xx:xx:xx:xx:xx format.
(If you are using an external RADIUS server, the username/password
format is: xxxxxxxx.)
z Enter the same address in the above mentioned format in the Password
and
Verify Password fields.
z If you want to assign a special role to the user that is different from the
MAC-based authentication default role, in the Role field enter the role
for the user.
z Select the Enabled checkbox to activate the user.
z Click Apply to apply the settings.
2 Deleting/ Disabling user from the database
z To delete a user from the database, navigate to the Security > AAA Serv-
ers > Internal Database
page.
z Click Delete to the right of the user you wish delete. The user is
deleted.
z You can also disabled the user such that the entry will exist in the data-
base but will not be used for authentication purposes. This can be
achieved by clicking
Disable on the right of the user entry.