User Guide

OmniAccess RN: User Guide
130 Part 031650-00 May 2005
1. Click Add under the Choose an Authentication Server to add a RAIDIUS server
to the 801.x setting.
2 From the pull down menu, select the RADIUS server that will be the primary
authentication server.
3Click Add after making the choice.
4 To add multiple auth servers repeat above steps for each server.
5 The servers appear in the order of descending priority. The first entry is
always the primary server. To change the order, use the S or T to the right
on the entry to move it higher up or lower down in the list.
6Click
Apply to apply the changes made. Ensure that the changes made
have taken effect on the resultant page.
Example
This example uses the following configuration:
Default roledot1x_user
Machine Authentication Default Role dot1x_mc