User Guide

Configuring the Captive Portal 109
Chapter 10
2 Under
Choose an Authentication Server is a pull down menu. From this menu
select the authentication server that will be the primary server.
3Click
Add for the selection to be applied.
4 To add more authentication servers as backup servers, repeat the steps
above.
5 The servers appear in the order of descending priority. The first entry is
always the primary server. To change the order, use the or to the right on
the entry to move it higher up or lower down in the list.
6Click the
Apply, for the configuration changes made to take effect.
Example
This example sets up the captive portal for user logon:
z The user gets employee role.