User Guide

OmniAccess RN: User Guide
108 Part 031650-00 May 2005
6 From the pull-down menu select the desired role the user will be placed in
after logon. Note that this role would be applied only if there are no other
derivation rules that supersede it.
7 Ensure that the Enable User Logon checkbox is selected
8 Set the protocol type http or https as per the requirement.
9 Set the welcome page location to the required URL.
Configuring the AAA Server for Captive Portal
To configure the AAA server that captive portal will use for authentication:
1. Click
Add under the Authentication Servers heading.
Welcome Page
Location
The welcome page is the page that appears soon
after logon and before re-direction to the web
URL. This can be set to any URL.
Default: /auth/welcome.html
Logon wait Interval Time range in seconds, the user will have to wait
for the logon page to pop up in case the CPU load
is high. This works in conjunction with the CPU
Utilization Threshold.
Default: 5 – 10s
CPU Utilization
Threshold
The CPU utilization percentage above which the
Logon wait interval gets applied while presenting
the user with the logon page.
Default value: 60 %