User Guide

OmniAccess RN: User Guide
102 Part 031650-00 May 2005
5 Configure the captive portal parameters.
Parameter Description
Default role The role assigned to the guest user on logon.
Default: guest
Enable Guest Logon This field need to be checked to enable guest
logon as explained above.
Default: Unchecked
Enable User Logon This field needs to be checked to enable user
logon authentication using an authentication
server. In case of guest logon this field needs to
be unchecked if captive portal is used for guest
logon only.
Default: Checked
Enable Logout Popup
Window
When this is enabled, a pop up window will
appear with the Logout link for the user to logout
after the user logs in.
If this is disabled, the user remains logged in till
the user timeout period or till station reloads as
the user does not have a logout mechanism.
Default: Checked
Protocol type The protocol used on re-direction to captive portal
page. http / https – If http is selected, the captive
portal policy will have to be modified to allow http
traffic.
Default: https