User Guide

Configuring AAA Servers 93
Chapter 9
To add a new user entry to the Internal Database:
1. Navigate to the
Configuration > AAA Servers > Internal Database page.
The parameters, a description of the parameters and the values used in this
example are listed below.
2Click Add User under Users. The user configuration page displays.
3 Add the user information.
4Check the
Enable box if this entry needs to be activated on creation. If this
box is unchecked, this user entry will not be considered during authentica-
tion.
5 Configure the role of the user.
Parameter
s
Description
Values used in the
example
User Name
<The user name that will be used
by the user. Mandatory field>
User1
Password
<The password of the user.
Mandatory field>
User123
Role
<The role the user will get is not
configured. Optional field. Default
is guest>
-None-
mail
<the email address of the user>
[e-mail]