User Guide

Configuring AAA Servers 91
Chapter 9
3 Fill in the information collected from step 1.
4 Set the mode to
Enable to enable the LDAP server when it is online.
5Click
Apply to apply the changes made to the configuration.
NOTE—The configuration does not take effect until this step is performed.
6 To add multiple servers, repeat steps 1 through 5 for each server.
Editing an Existing Entry
1. Navigate to the Configuration > AAA Servers > Security > LDAP page.
2Click
Edit for the entry to be modified and modify the desired parameters.
3Click
Apply to have the changes take effect.