User Guide

Configuring AAA Servers 89
Chapter 9
Users can move across the departments but the users belonging to
department1 will always use the RADIUS server in department1 regardless of
whether they are trying to authenticate from department1 or department2 as
long as they use the right FQDN.
LDAP Server Settings
NOTE—As of AOS-W 2.4 and higher LDAP support has been expanded to
include Secure LDAP.
To add a new LDAP server entry:
1. Navigate to the
Configuration > AAA Servers > Security > LDAP page.
To configure the switch, the following information is required.
Department 2
Department 1
Department 2Department 2
Department 1
Parameters Description Values
Server Name <The name of the LDAP
server>
LDAP_Server1
IP Address <The ip address of the LDAP
server>
192.168.200.1
Authentication
Port
<The port on which the LDAP
server is configured. The
default value is 389.>
600