User Guide

OmniAccess RN: User Guide
88 Part 031650-00 May 2005
6 To add the domains that this server will use, click ADD FQDN.
7 In the resulting dialog box, add the entry and click
ADD. To add more
entries, repeat this step.
8 To trim the FQDN portion of the username before sending the credentials to
the auth server, check the TRIM FQDN option. If this option is not selected,
the username along with the FQDN component is sent to the server and the
server should be configured for the same for a match to be successful.
For example :
[e-mail] is the username the user uses to
authenticate. If TRIM FQDN is enabled, only Client3 is sent to the server. If
unchecked,
[e-mail] is sent to the server for authentication.
9Click
APPLY to apply the changes before navigating to another page.
Example Deployment
All departments use the same authentication method (such as 802.1x) and the
same ESSID for all users and departments to ensure smooth mobility but users
of each department are authenticated against the RADIUS server maintained
by the department for control.