User Guide

OmniAccess RN: User Guide
78 Part 031650-00 May 2005
5 After entering the values as explained above, click Apply to apply this con-
figuration.
NOTE—The role will not be created until the configuration is applied.
4.
Bandwidth
contract
A bandwidth contract can
be assigned to a user role
to provide an upper limit to
the bandwidth utilized by
users in this user role. As
an example, the
administrator may want to
cap the total bandwidth
used by the guest users in
a network to 2Mbps.
If the per-user option is
selected, the bandwidth
contracts are applied on a
per-user basis as compared
to all users in the role.
To create a new bandwidth
contract, select the “Add
New” option. Enter the name
of the bandwidth contract and
the bandwidth to be allowed
(in kbps or mbps). Click Done
to add the new contract and
assign it to the role.
5.
VPN Dialer This assigns a VPN dialer to
a user role. For details
about VPN dialer, refer to
the “Configuring VPNs”
section.
Select a dialer from the
drop-down list and assign it to
the user role. This dialer will
be available for download
when a user logs in using
Captive Portal and is assigned
this role.
6.
L2TP Pool This assigns a L2TP pool to
the user role. For more
details about L2TP pools,
refer to the “Configuring
VPNs” section.
Select the required L2TP pool
from the list to assign to the
user role. The inner IP
addresses of VPN tunnels
using L2TP will be assigned
from this pool of IP addresses
for users in this user role.
7.
PPTP Pool This assigns a PPTP pool to
the user role. For more
details about PPTP pools,
refer to the “Configuring
VPNs” section.
Select the required PPTP pool
from the list to assign to the
user role. The inner IP
addresses of VPN tunnels
using PPTP will be assigned
from this pool of IP addresses
for users in this user role.