User Guide

OmniAccess RN: User Guide
74 Part 031650-00 May 2005
3 On the Edit policy page, the administrator can delete existing rules, add
new rules (following the same procedure in Step 3 of “Creating a New Pol-
icy” on page 66), or reorder the policies.
4 When all rules have been edited as required, click
Apply button to apply the
configuration.
NOTE—The changes will not take effect until the configuration is applied by
using this step.
Applying the Policy to a User Role
This section outlines the steps required to apply the policy to a user role. A
policy can be applied to one or more user roles. Similarly, each user role can
constitute one or more policies.
1. Navigate to the
Configuration > Security > Roles page on the WebUI. This
page shows the list of currently configured user roles and the policies that
constitute each user role.
2 If creating a new user role, click
Add to start creating and configuring a new
user role.