User Guide

OmniAccess RN: User Guide
72 Part 031650-00 May 2005
4Click Add to add this rule to the policy being created. If more rules are
needed, follow the same process to create and add more rules to the policy
8.
Black List Optional This field
indicates that a
client that is the
source or
destination of
traffic that
matches the rule
should be
automatically
blacklisted.
Select this option if it is
required to
auto-blacklist a client
that is involved in a
traffic session
matching this rule. This
option is recommended
for rules that indicate a
security breach and the
blacklisting option can
be used to prevent
access to clients that
are attempting to
breach the security.
9.
ToS Optional This field
indicates the ToS
bits in the IP
header that
should be marked
for packets
matching the rule.
Value of ToS bits to be
marked in the packet
when it leaves the
switch if it matches the
rule.
10.
802.1p
Priority
Optional This field
indicates the
802.1p priority
bits that should
be marked for
frames matching
this rule.
Value of 802.1p priority
to be marked in the
frame when it leaves
the switch if it matches
the rule.