User Guide

ManualsBrandsAlcatel-Lucent ManualsOtherOMNIACCESS

OmniAccess RN: User Guide

70 Part 031650-00 May 2005

4.

Action Required The action that

the administrator

wants the switch

to perform on a

packet that

matches the

criteria provided

above.

This field can take one of

the following fields:

z permit: Permits the

traffic matching this

rule.

z drop: Drops the

packets matching

this rule without

any notification

z reject: Drops the

packet and sends

an ICMP notifica-

tion to the source

of traffic.

z src-nat: Does a

NAT translation on

the packets match-

ing the rule. When

this option is

selected, the

administrator also

needs to select a

NAT pool. If this

pool is not config-

ured, the adminis-

trator needs to

configure a NAT

pool by navigating

to the Configuration

> Security >

Advanced > NAT

Pools

.

z dst-nat: Selecting

this option redirects

the traffic to the

configured IP

address and desti-

nation port. An

example of this

option is to redirect

all HTTP packets to

the captive portal

port on the Alcatel

Mobility Controller

as used in the

pre-defined policy

called “captivepor-

tal”.

z redirect: This

option is used to

redirect traffic into

a GRE tunnel. This

option is used pri-

marily to redirect all

guest traffic into a

GRE tunnel to a

DMZ router/switch.